Search results for: '1"'`--'[0]'

Ionode Water Hardness (PVC) ISE 1m BNC

Range (ppm):     1.0 to 10,000 ppm hardness as CaCO­3 (10 µM to 1M)

pH range:            7 - 10

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Na⁺, K⁺, Zn²⁺, Fe²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Ba²⁺

Learn More

Complete hand polishing kit for electrodes. Includes 3 particle sizes. Learn More

ECF-1 is an immersible cell recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids and alkalis. These can also be used for measurements in water paints. 

Learn More

ECF-1 and ECF-1t are immersible cells recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids, alkalis. These can also be used for measurements in water paints. 

Learn More

Ionode Sodium (PVC) ISE 1m BNC

Range (ppm):     0.1 - 23,000

pH range:            2 - 12

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Li⁺, K⁺, Cs⁺, Ca²⁺, Tl⁺, Ag⁺, H⁺

Learn More

Ionode Calcium (PVC) ISE 1m BNC

Range (ppm):     0.1 - 40,000

pH range:            2.5 - 11

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Pb²⁺, Hg²⁺, H⁺, Sr²⁺, Fe²⁺, Cu²⁺, Ni²⁺, NH₄⁺

Learn More

Ionode Chloride ISE 1m BNC

Range (ppm):     1.8 - 35,500

pH range:            2 - 12

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   S²⁻,Br⁻, I⁻, CN⁻

Learn More

Ionode Iodide ISE 1m BNC

Range (ppm):     0.013 - 130,000

pH range:            2 - 12

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   Br⁻, CN⁻, S²⁻

Learn More

Ionode Cyanide ISE 1m BNC

Range (ppm):     0.2 - 260

pH range:            5 - 7

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   S²⁻, I⁻, Br⁻

Learn More

Ionode Surfactant (PVC) ISE 1m BNC

Range (ppm):     10 - 14,400

pH range:            2 - 12

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Organic anions and, Cations which resemble the species of interest

Learn More

Ionode Phosphate Ion Selective Electrode

Range (ppm):     3.0 - 10,000

pH range:            4 - 5

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   Redox active species

Learn More

Ionode Fluoride Ion Selective Electrode

Range (ppm):     0.02 - 19,000

pH range:            5 - 7

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   OH⁻

Learn More

Ionode Nitrate (PVC) ISE 1m BNC

Range (ppm):     0.2 - 14,000

pH range:            2.5 - 11

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   HS^-, HCO₃-, CO₃^2-, H₂PO₄-, Cl^-, Br^-, I^-, ClO₄^-, ClO₃^-, CN^-, NO₂^-

Learn More

IH40A Sealed Gel pH Electrode with bullet membrane and S8/PG13.5 connector.

This electrode is intended to be mounted.  Please check your mounting requirements before purchasing. 

 

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More

Ionode Silver Sulphide ISE 1m BNC

Model	Parameter	Measuring Range	Temp. Range	pH Range	Main Interferences	Slope
ISE-Ag2S	S2-	0.003 - 32,000 ppm	0 - 60ºC	>11	Hg+/2+	57mV/decade ± 3mV
	Ag+	0.01 - 108,000 ppm		2 - 8		27mV/decade ± 3mV

Learn More

• Accurate laboratory meter 
• Measures: pH, mV (redox potential), conductivity, salinity and temperature..
• Large easy to read LCD display

 

Learn More

Conductivity calibration solution, 250ml 0.01M KCl, 1,413 µS/cm @ 25C

Lead time: 1-2 weeks

Learn More

CP-511 Bench top pH/mV Meter Learn More

Handheld oxygen meter. Supplied with Elmetron COG1 oxygen electrode, temperature sensor and carry case Learn More

CX-601 measures: pH, redox (mV), Ion concentration, conductivity, salinity, TDS, oxygen in the air and oxygen concentration in water, atmospheric pressure and temperature.

Learn More

Advanced fluorescence based optical sensor:

• No oxygen consumption, stable display in both static water and dynamic water
• Simple to use, No need to warm-up or frequently calibrate
• Maintenance free, No electrode membranes or electrolyte, service life of fluoresence cap >8000 hours
• Oxygen cap head has lightproof coating and is not affected by light and chemicals
• Equipped with electrode calibration sheath, for easy storage and calibration

Learn More

CC-511 Bench top Conductivity/Salinity Meter Learn More

Intermediate Junction ORP Electrode with platinum disk and replaceable electrolyte.

Range:    ±2000mV

Sensor:   Platinum Disk

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

Intermediate Junction pH Electrode with high temperature capability and replaceable electrolyte. With superior thermal and chemical properties for operation up to 100°C.

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              PVDF (Kynar) 

Temp:             0 - 100ºC

Learn More

Sealed Gel Double Junction ORP Electrode

Range:    ±2000mV

Sensor:   Platinum Disk

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

IH40A Sealed Gel pH Electrode

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More

IJ46 Intermediate Junction pH Electrode.

pH Range:      0 - 14

Membrane:   A Glass – Flat

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More

Ionode Intermediate Junction pH Electrode with replaceable electrolyte, general purpose.

pH Range:      0 - 14

Membrane:   A Glass – Spear

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More

Intermediate Junction pH Electrode.

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More

Intermediate Junction pH Electrode with high-temperature capability and replaceable electrolyte.

pH Range:      0 - 14

Membrane:   A Glass – Spear

Body:              PVDF (Kynar) 

Temp:             0 - 100ºC

Learn More

Sealed gel double junction ORP Electrode

Range:    ±2000mV

Sensor:   Platinum Wire

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

Sealed gel double junction reference electrode.

Reference Potential:    +198mV vs SHE

Reference:                       Double Junction Ag/AgCl

Body:                                 Polypropylene 

Temp:                                0 - 60ºC

Learn More

Intermediate Junction Reference Electrode with replaceable electrolyte.

Reference Potential:    +198mV vs SHE

Reference:                       Double Junction Ag/AgCl

Body:                                 Polypropylene 

Temp:                                0 - 60ºC

Learn More

Intermediate Junction ORP Electrode with platinum wire tip and replaceable electrolyte.

Range:    ±2000mV

Sensor:   Platinum Wire

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

Enhanced series Intermediate Junction ORP Electrode with platinum wire tip and replaceable electrolyte. With superior thermal and chemical properties.

Range:    ±2000mV

Sensor:   Platinum Wire

Body:      PVDF (Kynar) 

Temp:     0 - 100ºC

Learn More

Chloride Titration Electrode featuring Ionode's unique Intermediate Junction reference.

Learn More