Search results for: '1"'`--''

ECF-1 is an immersible cell recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids and alkalis. These can also be used for measurements in water paints. 

Learn More

ECF-1 and ECF-1t are immersible cells recommended for conductivity measurements in clear and contaminated water, sewage with sediments, grease, oil, acids, alkalis. These can also be used for measurements in water paints. 

Learn More

Conductivity standard 1,413 µS/cm, 1L

Lead time: 1-2 weeks

Learn More

Conductivity standard, 2.76 mS/cm, 1L

Lead time: 6 weeks

Learn More

Conductivity calibration solution, 1L 0.001M KCl, 147 µS/cm @ 25C Learn More

pH calibration solution, blue pH 10.00 @ 25C, 1L, NIST traceable

Learn More

pH calibration solution, red pH 4.01 @ 25C, 1L, NIST traceable Learn More

pH calibration solution, green, pH 7.00 @ 25C, 1L, NIST traceable Learn More

pH calibration solution, purple pH 6.86 @ 25C, 1L, NIST traceable Learn More

Conductivity calibration solution, 250ml 0.01M KCl, 1,413 µS/cm @ 25C

Lead time: 1-2 weeks

Learn More

Complete hand polishing kit for electrodes. Includes 3 particle sizes. Learn More

Handheld EC/salinity meter. Supplied with ECF-1T conductivity cell with ATC and carry case. Learn More

CX-461 Handheld Waterproof Multi-Parameter Meter Learn More

Ionode Water Hardness (PVC) ISE 1m BNC

Range (ppm):     1.0 to 10,000 ppm hardness as CaCO­3 (10 µM to 1M)

pH range:            7 - 10

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Na⁺, K⁺, Zn²⁺, Fe²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Ba²⁺

Learn More

Waterproof hand held pH/mV meter. Supplied with IJ40A Sealed gel pH probe, temperature sensor, pH 4.0 buffer, pH 7.0 buffer and carry case. Learn More

Waterproof hand held pH/mV meter. Supplied with IH40A Sealed gel pH probe, temperature sensor, pH 4.0 buffer, pH 7.0 buffer and carry case. Learn More

• Accurate laboratory meter 
• Measures: pH, mV (redox potential), conductivity, salinity and temperature..
• Large easy to read LCD display

 

Learn More

Ionode Sodium (PVC) ISE 1m BNC

Range (ppm):     0.1 - 23,000

pH range:            2 - 12

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Li⁺, K⁺, Cs⁺, Ca²⁺, Tl⁺, Ag⁺, H⁺

Learn More

Ionode Calcium (PVC) ISE 1m BNC

Range (ppm):     0.1 - 40,000

pH range:            2.5 - 11

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Pb²⁺, Hg²⁺, H⁺, Sr²⁺, Fe²⁺, Cu²⁺, Ni²⁺, NH₄⁺

Learn More

Ionode Chloride ISE 1m BNC

Range (ppm):     1.8 - 35,500

pH range:            2 - 12

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   S²⁻,Br⁻, I⁻, CN⁻

Learn More

CC-511 Bench top Conductivity/Salinity Meter with ECF-1 conductivity cell. Learn More

CP-511 Bench top pH/mV Meter Learn More

Hand held EC/salinity meter. Supplied with ECF-1T conductivity cell, conductivity standard and carry case. Learn More

CX-601 measures: pH, redox (mV), Ion concentration, conductivity, salinity, TDS, oxygen in the air and oxygen concentration in water, atmospheric pressure and temperature.

Learn More

Intermediate Junction ORP Electrode with platinum disk and replaceable electrolyte.

Range:    ±2000mV

Sensor:   Platinum Disk

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

Sealed Gel Double Junction ORP Electrode

Range:    ±2000mV

Sensor:   Platinum Disk

Body:      Polypropylene 

Temp:     0 - 60ºC

Learn More

Handheld oxygen meter. Supplied with Elmetron COG1 oxygen electrode, temperature sensor and carry case Learn More

Advanced fluorescence based optical sensor:

• No oxygen consumption, stable display in both static water and dynamic water
• Simple to use, No need to warm-up or frequently calibrate
• Maintenance free, No electrode membranes or electrolyte, service life of fluoresence cap >8000 hours
• Oxygen cap head has lightproof coating and is not affected by light and chemicals
• Equipped with electrode calibration sheath, for easy storage and calibration

Learn More

Ionode Iodide ISE 1m BNC

Range (ppm):     0.013 - 130,000

pH range:            2 - 12

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   Br⁻, CN⁻, S²⁻

Learn More

Intermediate Junction pH Electrode with high temperature capability and replaceable electrolyte. With superior thermal and chemical properties for operation up to 100°C.

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              PVDF (Kynar) 

Temp:             0 - 100ºC

Learn More

Ionode Surfactant (PVC) ISE 1m BNC

Range (ppm):     10 - 14,400

pH range:            2 - 12

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Organic anions and, Cations which resemble the species of interest

Learn More

Ionode Potassium (PVC) ISE 1m BNC

Range (ppm):     0.4 - 39,000

pH range:            2.5 - 11

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   Cs⁺, NH₄+, Tl⁺, H⁺

Learn More

Ionode Cyanide ISE 1m BNC

Range (ppm):     0.2 - 260

pH range:            5 - 7

Membrane:        8mm Crystal

Temp:                   0 - 60ºC

Interferences:   S²⁻, I⁻, Br⁻

Learn More

CC-511 Bench top Conductivity/Salinity Meter Learn More

Ionode Nitrate (PVC) ISE 1m BNC

Range (ppm):     0.2 - 14,000

pH range:            2.5 - 11

Membrane:        Polymer

Temp:                   0 - 40ºC

Interferences:   HS^-, HCO₃-, CO₃^2-, H₂PO₄-, Cl^-, Br^-, I^-, ClO₄^-, ClO₃^-, CN^-, NO₂^-

Learn More

Magnetic stirrer and electrode stand in chemical resistant ABS. Learn More

Ionode Silver Sulphide ISE 1m BNC

Model	Parameter	Measuring Range	Temp. Range	pH Range	Main Interferences	Slope
ISE-Ag2S	S2-	0.003 - 32,000 ppm	0 - 60ºC	>11	Hg+/2+	57mV/decade ± 3mV
	Ag+	0.01 - 108,000 ppm		2 - 8		27mV/decade ± 3mV

Learn More

Intermediate Junction Silver Billet Electrode with replaceable electrolyte, for determination of salt and other halides by argentimetric titration Learn More

Intermediate Junction Gold ORP Electrode, with gold wire tip and replaceable electrolyte Learn More

IH40A Sealed Gel pH Electrode with bullet membrane and S8/PG13.5 connector.

pH Range:      0 - 14

Membrane:   A Glass – Bullet

Body:              Polypropylene 

Temp:             0 - 60ºC

Learn More